A water-based top coat which is non - yellowing; Tough Coat comes in two sheens, matte and gloss.
Easy to apply with a sponge or the Fusion Applicator Sponge for a smooth finish.
Perfect for those high-traffic surfaces such as tabletops.
PLEASE NOTE do not use over medium to darker colours as it will show streaks.
Should streaking occur, apply a further coat of paint over the top coat.
Use the Natural colour All in One Stain & Finishing Oil as a substitute over dark paints, to avoid streaking and to provide an extra durable, strong topcoat over Fusion Mineral Paint over high-traffic areas like kitchen cabinets or tabletops and even flooring!
Re-coat Time: 1-2 hours
Dry Time : To touch 30min-1 hour Clean Up : Water
Coverage: 75 sq.ft
Finish/Sheen: Matte Recommended Uses: Heavy wear and tear areas for added durability. Can Be Applied To All water-based finishes, paints
Can Be Painted Over: Yes once dried How to Prep: Apply over water-based paints or topcoats for the desired effect – do not apply over oil-based products or wax
Cure Time: 14-30 Days Maintenance/ Cleaning: Light cleaners
How to apply: gently mix your Tough Coat before using it, as the matting agent and other ingredients may settle to the bottom. Do not shake vigorously, as this can introduce air bubbles which impact the look of the applied product and are difficult to remove once applied.
Wipe the Tough Coat onto your surface using a damp sponge or applicator pad. Damp here means barely wet – so that you can barely feel the water. Put a small amount of Tough Coat on the damp sponge and wipe it onto your piece, along with the grain, in one smooth motion. Avoid using a lot of product at once. It is better to apply a couple of thin layers rather than one thick coat.
